Pipes that are damaged, of course, you must immediately overcome so that the leak or damage is not too severe. If it’s already severe, of course, one option is to replace the pipe. Replacement can be with HDPE or PPR pipes and other types. Damage could be because you bought the wrong pipe or did not ask clearly to the HDPE pipe supplier about the installation. Before you overcome the damage that occurs in the pipe, HDPE Pipe things you need to do, of course, must be able to ascertain what causes the pipe to be damaged so you know whether to replace the pipe or not. In the meantime, if you don’t have the time to repair your pipe, perhaps you must call the best plumber columbia sc.
If a leak does occur, you have to make sure which part is leaking, is it in the pipe section or in the connection section?
Here are some ways to fix your pipe:
Cut pipes that have leaks
If the pipe has a leak you can eliminate it by cutting the part closest to the leak point. The trick is to cut one end of the pipe and also the other end at the top of the connection. After that on the connection with other pipes that have the same diameter as the leak. Then you can adjust the length of the pipe to be replaced. Also, apply special glue to the surface in the flox or the connection. Stick the new pipe that you have measured exactly at the ends of the two old pipes.
Overcoming leak repairing sets for PPR pipes
Repairing set for PPR pipes is one way to overcome the leak or damage to the pipe. This must be owned by each PPR pipe applicator. By doing a repairing set you can save time repairing the pipe without having to dismantle the floor or wall that is blocking the pipe. The repair technique will use a poly fusion welding system whose repair quality is guaranteed. Repair using a repairing set consists of 2 types, repairing stick 12 mm and repairing matrice 12 mm.